BMNXH - PAINT THINNER/MINERAL SPIRITS

  • MSDS: BMNXH
  • Manufacturer: PRESERVATIVE PAINT CO
  • Product Name: PAINT THINNER/MINERAL SPIRITS
  • National Stock Number: 8010-00N024841
Product Identification

Product ID:PAINT THINNER/MINERAL SPIRITS
MSDS Date:05/31/1988
FSC:8010
NIIN:00N024841
MSDS Number: BMNXH

Responsible Party
PRESERVATIVE PAINT CO
5410 AIRPORT WAY SOUTH
SEATTLE, WA 98108
US

Emergency Phone: 206-526-2121 OR 206-634-5252

Info Phone: 206-763-0300

Cage: 86589

Contractor
PRESERVATIVE PAINT CO
80387 SEATTLE, WA 98108-1726 US

Cage: 86589

Ingredients

5 MM

Fraction By Weight: 97%

OSHA PEL 250 PPM (MFR)


5 MM

Fraction By Weight: 3%

OSHA PEL 250 PPM (MFR)

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY CAUSE HEADACHE, DIZZINESS, LOSS OF
APPETITE, WEAKNESS & LOSS OF COORDINATION. AFFECTED PERSONS
NORMALLY EXPERIENCE COMPLETE RECOVERY WHEN REMOVED FROM EXPOSURE
AREA. ASPIRATION OF THE LIQUID CAN L EAD TO CHEMICAL PNEUMONITIS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYE:FLUSH W/FRESH WATER FOR AT LEAST 15 MINS. INHAL:MOVE TO
AN UNCONTAMINATED AREA & GET MEDICAL ATTENTION. IF BREATHING STOPS,
APPLY ARTIFICIAL RESPIRATION. INGEST:DO NOT INDUCE VOMITING. GET
MEDICAL ATTENTION IMMEDIATELY. SKIN:FLUSH W/COPIOUS AMOUNTS OF
WATER. CALL MD .

Fire Fighting

Flash Point Method:TCC
Flash Point:104F,40C
Lower Limits:1-6.0
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICAL & WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Accidental Release

Spill Release Procedures:ELIMINATE ALL SOURCES OF IGNITION IN VICINITY
OF SPILL OR RELEASED VAPORS. CLEAN UP SPILLS AS SOON AS POSSIBLE,
OBSERVING PRECAUTIONS. ABSORB LARGE SPILLS W/ABSORBENT CLAY OR
DIATOMACEOUS EARTH & DISP OSE OF CONTAMD MATL IN APPROVED
DUMPINGAREA.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP AWAY FROM HEAT OR OPEN FLAME. USE
ONLY IN WELL-VENTILATED AREA.
Other Precautions:EMERGENCY ACCIDENT PROCEDURES: TURN OFF IGNITION -
CARBON DIOXIDE & DRY CHEMICAL.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED ORGANIC VAPOR RESPIRATOR
OR SCBA.
Ventilation:LOCAL EXHAUST:USE ADEQUATE VENT TO KEEP VAPOR/MIST CONC OF
THIS MATERIAL BELOW SUGGESTED TLV (250 PPM).
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:SOME TYPE OF WASHING FACILITY FOR EYES &
SKIN SHOULD BE AVAILABLE NEARBY.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Boiling Pt:B.P. Text:316F,158C
Vapor Pres:SEE INGRED
Vapor Density:HVR/AIR
Spec Gravity:0.774
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:100

Stability

Stability Indicator/Materials to Avoid:YES
MAY REACT W/STRONG OXIDIZING MATERIALS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NORMAL COMBUSTION FORMS CARBON DIOXIDE
& WATER VAPOR. INCOMPLETE COMBUSTION CAN PRODUCE CARBON MONOXIDE.

Disposal

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE W/FEDERAL, STATE
& LOCAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.